Friday, August 05, 2016

How to clear 'Replace Fuser E' from DocuPrint 255

DP255_FAMILY_RESERVED_land_277x195.jpg
The DocuPrint 255


Here’s how to clear the message ‘Replace Fuser E’ from Fuji Xerox DocuPrint 255 control panel.

With the printer showing ‘Ready to print’:

  1. Press Eject/Set and Down buttons together. This will bring up the Consumables Menu.
  2. Press Up or Down to look for the Reset counter option.
  3. Press Right to show Reset Fuser U4, then Right again followed by Eject/Set

That should clear the fuser counter. You can find the original post here.

Or, you could just replace the printer since this is a really old model...